Steam Room Generators

Drawing on 170 years of combined experience in wellness solutions, Sauna360 introduces the new AK Series Steam System. Purpose-designed for home use, an AK generator uses full power to quickly heat up your steam room to its preset temperature, then cuts power by 1/3 or 2/3 of its heating elements. The result is a more consistent flow of soft steam and more stable temperature - the perfect conditions for relaxing and recharging whenever the mood strikes you.


Feature & Benefits


  • Sequential Temperature Control delivers a more consistent flow of Soft experience.
  • Available in 6 popular sizes - 4.5kW, 6kW, 7.5kW, 9kW, 11kW and 14kW.
  • AK generators can be connected together to heat steam baths larger than 16 cubic metres.
  • 240 and 208 volt models can be wired in the field for 1 or 3 phase power.
  • Stainless steel tank and water level probes provide years of trouble-free operation.
  • Removable heating elements provide easy and economical service.


Control Options


K2 Touch Screen Control


Operate your steam bath from anywhere via the dedicated mobile app! K2 has a modern design and is simple to use with its clear display indicating temperature and run time. K2 can be mounted inside or outside of the steam room for ease of use.


  • Touchscreen operation for easy control
  • Surface mounted - inside or outside the steam room
  • Choice of trim ring in six finishes - Polished chrome comes as standard. Or upgrade to Brushed Nickel, Polished Nickel, Oil Rubbed Bronze, Matte Black, or Brushed Bronze by purchasing the upgrade kit.
  • Intuitive display (temp/time/lighting/system status)
  • 24hr time delay; 60 minute timer
  • Light control (on/off, dimmer and colour selection)
  • WiFi module; mobile app functionality from anywhere there is mobile phone service.
  • SaunaLogic App for Android or iPhone; and works with Google Home, Alexa and Siri
  • Includes OTA (Over the Air) technology for automatic software updates to mobile device.

K2 Touch Screen Control




The SaunaLogic app allows you to control all function and programming of your steam room (and/or sauna) from wherever they are, requiring only WiFi connection or phone service (3G/4G). Within the app you can adjust temperature, choose light colour, set a delay time up to 24-hours, use the 60-minute timer and at a glance see the current status of your steam bath. Available for Android smart phones, iPads/tablets and works with Google Home, Alexa and Siri.


K2 Amerec Control in Steam Shower
K2 Amerec Control Mobile App


K3 Touch Control Panel


A neat and compact black, glass faced control with 3 buttons, allowing simple intuitive setting of important functions - on/off, run time setting and temperature. The generator can be set on installation to provide either maximum 60 minutes (recommended) or 24 hour run time. Using the supplied thermostat sensor, K3 can be mounted inside or outside the steam room.


K3 Touch Control Panel



KT3 Touch Control Panel


If the control will be fitted within the steam room, KT3 offers the best solution for simple operation and fitting. With all the same features as K3, this model has a built in temperature sensor so there is no need to fit a separate unit. Should you want to activate the steam remotely, from outside the room, you can add K4 Control (detailed below). 


PLEASE NOTE: KT3 will only work when installed inside the steam room - for other locations, choose K2 or K3.




 K4 ON/OFF Non-Thermostatic Control


This basic on/off 30 minute control is perfect for those who like simplicity. The control illuminates during generator operation and can be mounted inside or outside the steam room.


K4 ON/OFF Non-Thermostatic Control